PLATING ANALYZER

A-08 NICKEL PLATING TEST KIT

This kit measures concentration of nickel sulphate, nickel dichloride, and boric acid in the nickel plating bath.
Titrimetric analysis can be easily performed by adding dedicated reagents, such as A-solution,
B-solution, and other solutions, to the testing-stand in the order of prescribed methods.
The test kit is a direct-reading type. Concentration (g/ℓ) of compound within 1ℓ of plating solution can be read directly from the burette’s scale.
Outer (Installation) Dimensions: 220 (L)×500 (W)×500 (H) mm
Material: Pyrex Glass, Acryl, PVC, SUS304, Brass

*The concentration of ammonium chloride can be measured by a burette for ammonium chloride (sell separately).

A-22 ELECTROLESS NICKEL PLATING TEST KIT

This kit measures concentration of metallic nickel and sodium Hypophosphite in the electroless(chemical) nickel plating bath.
Titrimetric analysis can be easily performed by adding dedicated reagents, such as A-solution,
B-solution, and other solutions, to the testing-stand in the order of prescribed methods.
The test kit is a direct-reading type. Concentration (g/ℓ) of compound within 1ℓ of plating solution can be read directly from the burette’s scale.

Outer (Installation) Dimensions: 220 (L)×500 (W)×500 (H) mm
Material: Pyrex Glass, Acryl, PVC, SUS304, Brass

PLATING TESTER

B-52-1CWJ HULL CELL TEST KIT MODEL-10A15

Hull cell test is a simple and effective testing-method, by which electroplating characteristics can be examined. It is also adopted as a testing item in the Plating Skills Assessment 1st Grade Test. Since plating-film of a wide range of cathode current densities can be observed on a single test-piece, it is possible to conduct studies of optimal plating conditions and effects from lack or excess of chemicals (such as additives), existence of trace amount of impure substances and deposition distribution on alloy films. The attached DC Power Supply is of high performance and step current can be programmed within 10mA~10A range, making it possible to use the kit for purposes other than hull cell tests. This kit is recommended for first-time hull cell users.

[Set includes: Hull Cell Thermostatic-Control-Type Tank/ Hull Cell Power Supply (YPP15101C, with thermostat/ current integrator/ boil-dry-protection functions, Lead Wire with Titanium Clip)/Heater/Hull Cell Anode & Cathode Plates/ Air Pump, etc.

B-52W-YTC300 HULL CELL TEST KIT Model-YTC300

Set consist of Thermostat (AC100-230V) and Heater with built-in thermal fuse (48V,100W)
This set is compliant with IEC standard and bears CE marking. Power supply and air-pump are sold separately.
[Set includes: Hull Cell Thermostatic-Control-Type Tank/ Thermostat YTC-300/ Heater/ Hull Cell Anode & Cathode Plates/ Others etc.

B-52WJ HULL CELL TEST KIT MODEL-10A2-WJ

Hull cell test is a simple and effective testing-method, by which electroplating characteristics can be examined. It is also adopted as a testing item in the Plating Skills Assessment 1st Grade Test. Since plating-film of a wide range of cathode current densities can be observed on a single test-piece, it is possible to conduct studies of optimal plating conditions and effects from lack or excess of chemicals (such as additives), existence of trace amount of impure substances and deposition distribution on alloy films. The ripple on the attached DC Power Supply is about 4%, but the power supply is reliable with maximum current of 10A.

[Set includes:] Hull Cell Thermostatic-Control-Type Tank/ Hull Cell
Power Supply (Model-10A2) /Thermostat/Heater/ Hull Cell Anode & Cathode Plates/Air Pump/Lead Wire with Titanium Clip, etc

TRIAL AND SMALL-LOT PRODUCTION KIT

A-52 SILICON WAFER PLATING LABORATORY EQUIPMENT SET

Plating set for 2~12-inch silicon wafers. By using dedicated jigs, precision plating of semiconductors, MEMS and micromachines is possible. The set is designed with overflow-mechanism, which generates a gentle convection from the base of the tank, while conducting constant filtration. Paddle agitators are used for actual agitation. The set can also be used as production facility. (PC is sold separately)
(Several patents acquired and pending in Japan and abroad.)

Applicable standard size is 2~12inch, but we can accommodate your request to manufacture sets that meet various needs.
(Various types are such as fully sealed/non-sealed-type jigs, horizontal-type are available.)
*Please contact us for detail by e-mail.